| |
|
|
| |
Industrial Automation |
|
| |
....................................................................................................................................................................................... |
|
| |
At Crystaline Infotek we have a powerful team of over 50 engineers with strong domain knowledge of industrial automation. We have skilled expertise in various makes of PLCs , SCADA devices and almost all the industrial protocols.
We are basically a design-based organization and our products have evolved from customer needs. They cover almost entire spectrum of data connectivity, acquisition & monitoring requirements. These products are very well proven and are widely accepted by all types of industries.
Mainly our experience can be grouped into the following areas:
- Protocol/ Interface Converters
- Various types of data logger
- Remote A / DI / Os
- Line drivers
- Code operated switches
- Sharing devices
- HMI (Human Machine Interface)
- Application Engineering for SCADA (Intellution) software
- Embedded Software Development
- Web Enabled Connectivity solution
- Ladder Programming
- Communication Interface to a Process Control System
- Turnkey / Customized Solutions
|
|
| |
|
|
| |
Some of our Important projects |
|
| |
|
|
| |
| Serial to Ethernet converter |
| Type of work : - Hardware and Firmware |
|
|
| |
This converter allows existing legacy instruments and equipments on serial interface with RS232 or RS485 to be connected to Network. The development was done as a turnkey product development for an OE customer. Support for various serial and networking parameter configuration was provided. This can support TCP, UDP, ICMP and ARP network protocols and acts as a pass through converter from TCP / IP. The network socket connection could be initiated from the converter or from the external network device. Another models with support for additional protocols support such as MODBUS TCP was also developed around same core firmware. |
|
| |
|
|
| |
| Remote Monitoring Gateway |
| Type of work : - Hardware and Firmware |
|
|
| |
For remotely tracking run time parameters in factory plant, it was required to send periodic information from the equipment to the central web server. This gateway was developed to provide such a solution. It had one serial interface to collect the information from the controller, had built in modem for Telephone dial up interface and also PPP stack chip. The gateway would dial out to local ISP and connect to web server application waiting for the information. Once the information was sent, the gateway would disconnect. The gateway had few digital IO lines as well. The web server application would then assimilate the information and present in HTML format for global access. |
|
| |
|
|
| |
| Smart - Comm |
| Type of work: - Hardware and Firmware |
|
|
| |
The SMART-Comm HS80 is a connectivity and protocol-converting product used by OEMs and End User Fabs to integrate SMIF I/O's, SECS devices, and Auto ID technologies. The SMART-Comm improves communication speeds and efficiency by combining protocol conversion and multiplexing in a single device. The SMART-Comm provides a common interface from the CIM system to semiconductor equipment, auto ID components, and serial devices. |
|
| |
|
|
| |
|
|
